CD PLAYER OPERATION
Note:
This CD player plays not only the commercial CDs but also self-compiled CD-R/RW discs.
1. Press
the
POWER
Button to turn the unit “On”. The POWER INDICATOR lights.
2. Set
the
FUNCTION
Selector to the
CD
position.
3. Open the CD Door. Carefully place an audio CD, with its label side upward, on the center spindle and
close the CD Door.
4. Two dashes “- -“ flash while the Player reads the table of contents of the disc. The Display will show the
total number of tracks on the disc for a few seconds and then return to the current time.
Note:
If the disc is inserted incorrectly, or if the disc is badly scratched and cannot be read by the player,
“
no
” will appear in the Display for a few seconds, and then the Display returns to the current time.
5. Press Button to begin playback. The Display will briefly show “01” (Track 01) and playback on track
01 begins. After a few seconds the Display returns to the current time.
If you want to check the Track under playing press the
DISPLAY
Button once.
6. Adjust
VOLUME
Control to obtain the desired sound level from the Speakers.
7. To suspend play, press the Button (# 6) once. The Display will briefly show the flashing current
track and then return to current time.
To resume playing, press the Button again.
8. You can choose to play your favorite track directly by pressing either the Skip Forward
Button
or the Skip Backward
Button until the desired track number appears in the Display.
For example Track No. 12 is selected. Playback will begin on the selected track.
7
9. To locate a particular passage within a track, keep the Search Forward
Button or Search
Backward
Button depressed until it is found.
10. To repeat a particular track, press the
PLAY MODE
Button once in STOP mode. The
REPEAT
INDICATOR appears and flashes.
11. Press the
or
Button to select the particular track e.g. track 08 to be repeated. While the track
number is flashing, press the Button to start playback. Track 08 will be repeated continuously.
