Press the options button repeatedly until SET
Caller ID displays in the
LANGUAGE appears on the display. Press or Button
wrong language
to choose the desired language and press option button
to enter. The default language is English.
Memory Dialing does not
Check the phonej if you have programmed the numbers
work
correctly by pressing that memory number button.
Cannot see the name or
Did you wait for the second ring before picking up the
number of the caller
phone? The Caller ID will only detect information
between the first and second ring.
The Caller may have an unlisted or blocked number to
prevent Caller ID identification or it may be an overseas
Caller’s information is not
call or you may have noise on the line during that call.
registered
Did you or your answering machine answer calls before
the second ring?
Your Memory button has no stored number.
Pressing Memory button
Please store the number again by pressing the
prog
.
does not display number
button, dial the number, press
memory
again and
a numerical button to store it to the desired location.
18
19
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA On the bottom of this equipment is a label that contains, among other information, a
product identifier of US:H8A09BKT2017. If requested, this number must be provided to the
telephone company.
The applicable jacks (i.e. RJ11C) for this equipment are provided in the packaging with each
piece of approved equipment. The jacks are certified by Universal Service Order Codes
(USOC).
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted by
the ACTA. A compliant telephone cord and modular plug are provided with this product.
They are designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company.
[For products approved after July 23, 2001, the REN for this product is part of the product
identifier that has the format US: AAAEQ##TXXXX. The digits represented by ## are the
REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.]
If this equipment causes harm to the telephone network, the telephone company will notify
you in advance that temporary discontinuance of service may be required. But if advance
notice isn’t practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
If you experience trouble with this equipment, disconnect it from the network until the problem
has been corrected or until you are sure that the equipment is not malfunctioning.
Please follow instructions for repairing if any (e.g. battery replacement section); otherwise
do not alter or repair any parts of device except specified. Connection to party line service is
subject to state tariffs. Contact the state public utility commission, public service commission
or corporation commission for information.
This equipment is hearing aid compatible.
CONSUMER INFORMATION
