-12 -
11.MAINTENANCE AND CLEANING
METHOD
Battery replacement
Your batteries are situated under the tester-to
replace-
Switch "OFF" the Instrument.
Unplug the test leads from the tester.
Unscrew the screw situated at the bottom of the
battery cover.
Slide the battery cover off the bottom of the tester.
Remove the flat batteries from the batteries holder.
Observing battery polarity, replace with new
Alkaline
batteries.
Replace the battery cover.
Cleaning and Storage
Periodically wipe the case with a damp cloth and
detergent. Do not use abrasives or solvents.
If the meter is not used for over 60 days, remove the
battery for storage.
Servicing
There are no customer-serviceable parts in this
Instrument.
Should the Instrument require servicing, please,
return-it without batteries but complete with test
leads to your nearest distributor.
I00
WARNING
To avoid electrical shock or damage to the meter,
do not get water inside the case.
-13 -
10.INITIALISING - STARTING THE TEST
Quick Test
Long Test
A Long Test (up to 99.9 Sec) is done by
depressing "TEST" for more than three
Seconds.
Stopping the test
A Quick test (less than 16 Secretary)
is done by depressing "TEST" for less
than two seconds.
The Test can be stopped at any time by
depressing "TEST" key.
The Instrument will then auto-
Discharge the circuit and hold the last
stable reading.
Voltage decay can be observed on the
bargraph.
Main Menu - New Test - New Selection
After termination of a test, the Main
Menu can be accessed by depressing
The "TEST" key.
The Instrument will then display the
voltage selection menu and a new test
can be started.
TEST
START/STOP
TEST
START/STOP
TEST
START/STOP
TEST
START/STOP
Содержание Top Tronic TIN4D
Страница 16: ......
