manualshive.com logo in svg
background image

M K 9 P

Messerwechsel

Achtung! 

Vorsicht beim Messerwechsel! Die Klingen sind sehr scharf! Verletzungsgefahr!

Luftversorgung unterbrechen.

Schraube für Stirnkappe lösen.

Stirnkappe und Messer abnehmen.

Messer tauschen.

Messer und Stirnkappe entsprechend Abbildung montieren. Dabei Richtung der Schneide beachten!

Stirnkappe vorsichtig verschrauben, Gewinde nicht zerstören.

Empfehlung: Zum Schmieren der Pneumatik Kolben empfehlen wir das Fett RENOLIT MP 
von dem Unternehmen Fuchs Europe Schmierstoffe GmbH. 

Replacement of blades

.

Caution! 

Take care when replacing the blades! There is danger of injury!

Disconnect air supply.

Unlock screw holding the front plate.

Remove front plate and blade.

Exchange the blade.

Re-assemble blade and front plate in accordance with illustration. Notice direction of cutting blade!

Screw front plate on carefully, do not overtighten the screw. 

Recommendation: For lubricating pneumatics piston we recommend the grease 
RENOLIT MP from Fuchs Europe Schmierstoffe GmbH.

110-09111

110-09117

110-09306

Bestell-Nr.

Order-Nr. 

Bezeichnung

Description

110-09111

Messer

Blade

110-09117

Stirnkappe

Front Blade

110-09306

Schraube

Screw

110-07200

Verstellsicherungskappe

Lock Cap

Ersatzteile/Spare parts

Содержание MK9P









Отзывы: