background image

Emptying the internal tank 

 

  Switch off the unit and unplug from the mains supply. 

  Turn the unit upside down to reveal a drain plug located in the centre of the base. 

  Remove the spring clip securing the silicone cap to the drain and remove the silicone cap. 

  Drain the unit. 

  Refit the silicone cap and spring clip.

 

 

  

CARE & MAINTENANCE 

 

 
 
 
 
Please note: 
 

  Do not use harsh detergents or abrasive cleaners. 

  Do not place any part of this appliance in the dishwasher. 

  Wipe the base with a clean cloth or paper towel. 

  Wash the water tank in warm soapy water using a mild detergent. 

  Do not immerse the base in water or any other liquid. 

  If the unit is to be moved or if it is to be stored for a prolonged period without being used, it is 

recommended to drain the internal tank of any remaining water. 

  It is recommended that the unit is disassembled and cleaned periodically (every 2-3 months). 

 

To Clean: 
 

1.  Remove the filter and remove the Unfiltered Water Chamber. 
2.  Wash the Unfiltered Water Chamber with warm soapy water. 
3.  Use a damp non-abrasive cloth to wipe down the outside of the unit. Do not immerse body of unit in 

water. 

4.  Dry unit and parts with a soft dry cloth. 

 
Sanitation: 
 

1.  Combine two tablespoons of baking soda (bicarbonate soda) with 2 Litres of lukewarm water into 

separate jug or container and set aside. 

2.  Remove the Unfiltered Water Chamber and Filter Cartridge. 
3.  Pour mixture into Filtered Water Chamber. 
4.  Hold down the tap to ensure mixture fills the cooling tank. Leave for a minimum of 4 hours (ideally leave 

overnight). 

5.  Drain out mixture then flush 2-3 Litres of clean water through the unit until it has been flushed clean. 
6.  Remove the Drain Plug (underneath unit) to drain any excess water in the cooling tank. This is 

important to ensure all of the bicarbonate mixture is removed from the cooler. 

7.  With the drain plug still removed, pour 2 Litres of water through to remove any excess bicarbonate 

mixture from the system. Reinstate drain plug. 

8.  Flush clean water through the unit and rain out via taps. Tilt the unit back and forth to remove trapper 

water from unit.  
 
 

 

 

WARNING:

 

Switch “OFF” power and unplug unit before cleaning. The filter cartridge should be replaced 

every 150 Litres or 2 Months, whichever occurs first. This ensures filters perform as stated. If water has 
been left sitting in unit for more that 3 days, discard water and flush out unit. 
 

 

Содержание WFC5









Отзывы: