CAUTION: To avoid of electric shock, you must always switch off and unplug the fan before cleaning.
3.
Remove the plastic protector (12).
4.
Loosen the rear guard securing ring (5) from the motor housing assembly.
5.
Position the rear guard (4) firmly to the motor housing assembly and fasten by turning the rear
guard securing ring (5) clockwise tightly.
6.
Push the fan blade (6) along the motor shaft.
7.
Fasten securely, using the fan blade securing unit nut (7) with the spinner by turning anti-
clockwise.
8.
Mount the front guard (8) to the rear guard, by positioning the hook on the front guard over the
top of the rear guard. Secure the two grilles with clips and screw attached to the grill.
OPERATING INSTRUCTIONS
•
Remove the cable tie and unravel the cord set before operation. Connect the plug into an
electrical socket and switch on at the wall.
•
You can control your wall fan either with the oscillation knob, or with pull cords.
•
Pull the left cord to switch the fan
‘ON’. At first start
-up, the fan will operate at low speed.
•
Pull on the same left cord a couple of times to reach desired fan speed. Choose between Low
(1), Medium (2) and High (3) fan speed.
•
Pull on the right cord to switch on the oscillation mode.
CARE & CLEANING
•
Your appliance must be switched OFF via the main power supply and unplugged before
proceeding with any cleaning.
•
Clean the housing with a damp cloth, a vacuum cleaner or a dusting brush.
•
To clean the blade and grille assembly, first remove the safety grille, unscrew the locknut and
remove the blade from the Wall Fan. Wipe them clean with a slightly damp sponge.
•
Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the
appliance.
•
Never immerse the appliance in water.
•
Never spray the Wall Fan with liquids or submerge it in water or any other liquid.
•
Store the fan in a clean dry place when not in use.
SPECIFICATIONS
Model
Description
Voltage
Frequency
Wattage
WAL40P
40cm Wall Fan with Pull
Cord Operation
220-240V~
50Hz
60W
NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.
NOTE: Before inserting the plug into a power outlet, make sure that the correct voltage being used
corresponds to what is indicated on the rating label, and that the socket has an earth facility.
