WARNING: In order to avoid overheating, do not cover the heater
KNOW YOUR HEATER
1. PILOT LAMP
2. THERMOSTAT
3. OSCILLATION SWITCH
4. POWER SWITCH 5. AIR OUTLET 6. BASE
BEFORE USE
1. Before use, remove all packaging and inspect the appliance for any damage. If there are
appears to be any damage, please take back to place of purchase for a replacement.
2. Ensure that the heater is not located directly under a power socket and that a power socket
is available to power the appliance.
USING THE HEATER
POWER AND HEAT SETTINGS
0..... OFF
*
..... Fan only operation
I
.....LOW heat setting (1000W)
II.....HIGH heat setting (2000W
)
THERMOSTAT
Set the thermostat to "max." and operate the appliance until the
desired room temperature is reached. Turn the thermostat
anticlockwise until the appliance switches off with an audible "click".
This set temperature will be kept almost constant by the appliance
switching on and off automatically.
