FEATURES
1. Lid Cover
2. Cover Button
3. Handle Cover
4. Handle
5. Switch
6. Power Base
7. Filter
8. Stainless Steel Kettle Body
9. Water Level Gauge
BEFORE FIRST USE
The kettle should always be unplugged when filling or adding water. It is recommended that you boil a full
kettle several boiling cycles, using clean water with each cycle and filling the kettle (6) to its upper marking.
The water will reach boiling point after approximately 5 minutes, in which the unit will switch off
automatically.
OPERATION
1. Place the cordless base (8) on a dry, firm and level surface.
2. Pour the desired amount of clean water into the kettle. Do not touch any part of the kettle except the
handle (4). When the appliance is in use, ensure that the cover (1) is properly closed. The amount
of water can be measured by the level mark (9) on the outside of the kettle. Always pay attention to
the minimum and maximum levels, and ensure that the cover (1) is properly and firmly closed.