CAUTION: To avoid of electric shock, you must always switch off and unplug the fan before cleaning.
CAUTION:
•
Select a suitable location for the fan. Always choose a safe location in accordance to the
safely recommendations outlined.
•
When placing a fan on a table or shelf, always ensure that the power cord does not hang
where it can accidentally be pulled /pushed or accidentally fall.
•
Do not hang or mount the fan on a wall of ceiling.
NOTE: Before inserting the plug into a power outlet, make sure that the correct voltage being used
corresponds to what is indicated on the rating label, and that the socket has an earth facility.
OPERATING INSTRUCTIONS
1.
Place the fan on a firm and level surface.
2.
Plug the fan into a power outlet.
3.
Select the desired speed setting:
•
0
–
OFF
•
1 - LOW
•
2
–
MEDIUM
•
3
–
HIGH
4.
The fan can be set to oscillate by pushing the oscillating knob down. To stop the oscillating
feature, pull the oscillation knob up.
CAUTION: The fan should always be switched off when making any adjustments to the fan head angle.
5.
To adjust the tilt angle of the fan head, loosen the neck screw, swivel the fan to the desired angle
then re-tighten the screw.
CARE & CLEANING
•
Your appliance must be switched OFF via the main power supply and unplugged, and allow it to
cool down before proceeding with any cleaning, assembling or disassembling.
•
Clean the housing with a damp cloth, a vacuum cleaner or a dusting brush.
•
We recommended lightly running a vacuum cleaner brush nozzle over the fan grille to remove
any dust or dirt that may have accumulated.
•
Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the
appliance.
•
Never immerse the appliance in water.
NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.
