ASSEMBLY INSTRUCTIONS
Step 1 – Place the Cooler Body (B) upside down, so the bottom is facing up.
Step 2 – Attach the Leg Assemblies (C) by lining up the holes in the leg assemblies (C) and securing with M5x12
Bolts (I), (4) four should be used for each of the Leg Assemblies (C).
Step 3 – Next attach the Bottom Tray (D) to the Leg Assemblies (C) by lining up through the holes in the Bottom
Tray (D) with the threaded holes in the Leg Assemblies.
Step 4 – Thread the (2) two Caster Wheels with Locks (E) into the threaded holes on the left side of the Leg and
Tray Assembly. Make sure both of the Casters have locks on them. Secure them using an adjustable wrench. Do
not over tighten as the threads may strip.
Step 5 – Repeat Step 4 with the remaining Caster Wheels (F) for the right side of the Leg and Tray Assembly.
Step 6 – Carefully turn the Cooler Cart onto its wheels. Lock the Casters by pressing down on the lock pedal until it
clicks into the locked position.
Step 7 – Attach the Bottle Cap Collector (G) by slipping the tabs into the slots on the Cooler Body and then push
down, it will click into position.
Step 8 – Secure the Bottle Opener (H) using (2) Two M5 x 12 Bolts (I). Do not over tighten as the threads may strip.
Step 9 – Attach the Pull Handle (J) using (12) Twelve M4x16 Bolts (L). Do not over tighten as the threads may strip.
Step 10 – Attach the first Lid Knob (K) to the Cooler Lid. Repeat for remaining Lid Knob. Do not over tighten as the
threads may strip.
Step 11 – Place the assembled lid into position on the Cooler Body and press down to seal the Cooler. There
should be a snug fit.
Step 12 - Gently screw 2 nubs to the lid.
Step 13 -
When using the Cooler Cart remember to have the Drain Extension Tube tightened onto the drain spout
then tighten the Drain Cap onto the threaded end of the Drain Extension Tube to keep water running off from the
melting ice from leaking out. When finished using the Cooler Cart remove the Drain Cap from the Drain Extension
Tube so the water from the melted ice can easily drain. ** (NOT PHOTOGRAPHED) **.
CARE & CLEANING
CAUTION: Select a suitable location for the unit. Always choose a safe location in accordance to the
safely recommendations outlined.
.
WARNING: Heavy! Handle with care! Keep children away from assembly area!
TOOLS REQUIRED: Adjustable wrench and Screwdriver!
NOTE: We suggest you assemble the unit on a soft surface to avoid damage to the finish.
