Hella Gutmann mega macs PC, Быстрый старт

Страница: 15 / 28

mega macs PC Putting the mega macs PC into Operation
Connection to the PC VCI
7 Putting the mega macs PC into Operation
This section gives a description of how to switch on and off the mega
macs PC software as well as all the necessary steps for the first use of the
mega macs PC software.
7.1 Connection to the PC VCI
NOTICE
The PC VCI must always be connected via Bluetooth to the PC
on which the mega macs PC software is used.
The PC VCI is a regular feature of the mega macs PC software. The PC VCI
contains software components. Various functions of the mega macs PC
software therefore require a connection to the PC VCI.
7.2 Executing the mega macs PC software
NOTICE
During initial start-up and after every software update, the
software user needs to confirm the general terms and
conditions (GTC) of Hella Gutmann Solutions GmbH.
Otherwise, certain device functions will be unavailable.
NOTICE
When starting the device for the first time, you must couple
the mega macs PC software with the PC VCI. This requires
the mega macs PC software to be connected to the PC VCI via
USB cable. A Bluetooth connection is sufficient when starting
up in the future.
Proceed as follows to execute the mega macs PC software:
1. Insert the USB cable into the USB port on the PC and the PC VCI.
15