133 / 179
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
■
Set the time zone by choosing region and location (Fig. 136 /1) from the dropdown
boxes.
■
NTP (Fig. 136 /2) should be activated to set the correct time and date automatically
after reboot. Using NTP the IP address of the timeserver (Fig. 136 /3) has to be
defined.
If no NTP time server is activated the time and date can be set using the Push Services
protocol or manually.
■
To go back to the last saved settings click the
Reset
■
To save all the settings in the device click the
Save
6.12.2 Find me
Fig. 137: Find me
■
To locate the device click
Start find me
button (Fig. 137 /1). The status LED starts
flashing with a blue light and will stop flashing automatically after 5 min.
■
Click again to stop the flashing LED immediately.