13
Channel routing - configuring inputs and outputs
The C-DSP/P-DSP allows input channels to be freely allocated to the output channels. To perform
this allocation, click on the “Configure Inputs/Outputs” box in the DSP PC-Tool main menu once
the software starts.
This will then present you with the following input mask:
Naming inputs:
On the left hand side of this mask you can allocate a name to each of the input channels (C-DSP:
“A-H” and P-DSP: “A-F) to give you the best possible overview. Make the transfer using the right
and left mouse buttons.
•
Not used (input is muted)
•
Front L Fullrange
•
Front L Tweeter
•
Front L Midrange
•
Front L Woofer
•
Front R Fullrange
•
Front R Tweeter
•
Front R Midrange
•
Front R Midwoofer
•
Rear L Fullrange
•
Rear L Tweeter
•
Rear L Midwoofer
•
Rear R Fullrange
•
Rear R Tweeter
•
Rear R Midwoofer
•
Center Full
•
Center Tweeter
•
Center Midwoofer
•
Subwoofer
The following names may be allocated to the input channels:
Please note:
This setting does not affect the functionality. It is merely used as an overview
and helps you to better differentiate between the channels.
