HELIX H 1000 ESPRIT, Инструкция по сборке

Страница: 12 / 20

STEP 12:
a. There should now be 3 wires. two coming from the handle bars and one that you held from the upright
when installing the handle bars. Hold all three wires together as shown in
Figure #1
above.
b. Take Top Cover (
part #9
) and position with the notch in the rear to allow wires to come out.
See arrow in
Figure #2.
c. Place plastic cover top onto the matching lower cover while making sure the wires are held through the
notch. (
See Figure #3)
d. Gently snap the top cover onto the lower cover until all edges are flush. Gentle but firm pressure is required
to snap the two covers together. (
See Figure #4)
for method to press parts together.
See Figure #5
for final fit with wires in hand
1
2
3
4
3/ ASSEMBLY - COVER AND HANDLE BARS
- 12 -
1 2 3 4
5
helix manuals_Helix H1000 - lowres 26/06/2013 13:11 Page 12