heliumdigital.com
Pairing the KeyCover Folio
IMPORTANT
- In order to function, the KeyCover Folio must be
paired with your iPad. This needs to be done once upon initial
set-up only, and once paired the devices will automatically
connect when both are powered on and within range.
Slide the power switch on the KeyCover Folio to the “on”
position.
On your iPad select Settings >General>Bluetooth>On.
Press the “Pairing” button to make the KeyCover Folio
discoverable. After a few moments the iPad will display
“KeyCover Folio” as an available device. Select this device on the
iPad.
The iPad will display a code for pairing. Type this code into
the KeyCover Folio and press enter. The two devices are now
successfully paired.
If you encounter problems with pairing, see the
“Troubleshooting Tips” section at the end of this manual.
To Use the KeyCover Folio for travel.
Close the front cover and wrap the outer strap around the
outside of the case until the magnet on the strap “snaps” into
place.
