Helipal Storm Drone 6, Руководство пользователя

Страница: 8 / 13

8
Copyright@2015 HeliPal.com. All Rights Reserved
Compass Calibration
Please follow the following procedures to calibrate the compass calibration
1) Switch the G switch up and down quickly for 6 to 10
times, The LED indicator on the drone will turn on
constantly yellow.
2) (Fig.1) Hold your Multi-rotor horizontal and rotate it around the gravitational force line
(about 360
o
) until the LED on the drone changes to constant green, and then go to
the next step.
3) (Fig.2) Hold your Multi-rotor vertically and rotate it (nose down & tail up) around the
gravitational force line (about 360
o
) until the LED turns off, meaning the calibration is
finished
4) If the calibration was successful, calibration mode will exit automatically.
5) If the LED keeps flashing quickly Red, the calibration has failed. Switch the control
mode switch one time to cancel the calibration, and then re-start from step 2.
NAZA V2 Manual
It is important to learn more about the NAZA-M V2 GPS Controller. You can download
the manual here:
http://download.dji-innovations.com/downloads/nazam-v2/en/NAZA-M-
V2_Quick_Start_Guide_en.pdf