Helios STM 10 24 V 2P, Инструкция по установке и эксплуатации

Страница: 10 / 16

Damper Servo Motor STM .. 24 V 2P
Installation and Operating Instructions
3
2.0 Assembly of servo motor STM .. 24 V 2P
m
The safety instructions specified in section 1.2 must be observed
Direct assembly:
Simple direct assembly on damper axis with universal
terminal block (A or B). Secured against rotation with included
rotation lock.
Manual adjustment: Manual operation of damper with hand crank (C), locking with
interlock
switch
in any position. Unlocking takes place either manually or auto-
matically by applying the voltage.
Adjustable angle of rotation: Adjustable angle of rotation with mechanical stop.
High functional reliability: The actuator is overload-proof, requires no limit switches and auto-
matically stops when the end stop is reached.
Flexible signalisation: The actuator has a fixed and adjustable auxiliary switch. This can be
used to signal an angle of rotation of 10 % or 10 ... 90 %.
CHAPTER 2
ASSEMBLY
m
DANGER
EN