Setup
1. Remove the Charging Disc and DC power supply from its packaging. Place the Helios Charging Disc on
a flat surface.
2. Connect the supplied DC power supply into the Charging Disc, as seen in Figure 1.
3. Place the properly assembled Charging Disc into the desired location and prepare to plug the DC power
supply into a nearby wall outlet.
4. Carefully insert the DC power supply into the wall outlet, as shown in Figure 2.
5. Place your Qi-compliant device (not supplied) on the center of the Charging Disc, as shown in Figure 3.
6. If you are using a Qi-compliant after-market sleeve (not supplied), please see the operations manual
provided by the manufacturer for installation. After you have properly installed your Qi-compliant sleeve,
place the device on the center of the Charging Disc, as shown in Figure 4.
7. The LED indicator light on the Charging Disc will illuminate, indicating your device is charging, as shown in
Figure 5.
Trouble Shooting
Phone Not Charging
• Check for proper installation of the Qi sleeve per the manufacturer’s instructions
• Confirm connection between power supply and the Charging Disc
• Confirm connection at the wall outlet
• Ensure that the phone is positioned properly on the Charging Disc
• Verify that the phone is Qi-compatible
• Confirm that the phone sleeve is Qi-compatible
OPERATING INSTRUCTIONS (Continued)
FCC STATEMENT
Содержание LVWLC104111
Страница 5: ...Figure 1 Figure 2 Figure 3 ...
