Helios KWL-VOC Скачать руководство пользователя страница 6

1.0  Important information

In order to ensure complete and effective operation and for your own safety, all of the 
following instructions should be read carefully and observed. The relevant national stan-
dards, safety regulations and instructions (e.g. DIN EN VDE 0100) as well as the technical 
connection conditions of the energy supply company must be observed and applied.

 

Keep the operating instructions close to the unit for easy reference. After the final as-

 

sembly, the document must be issued to the operator (tenant/owner).

1.1  Warning and safety instructions 
 

The adjacent symbol is a safety-relevant warning symbol. All safety regulations  

 

and/or symbols must be absolutely adhered to, so that any dangerous situation is  

 avoided.

1.2  Warranty claims – Exclusion of liability

Our warranty shall not apply if the following instructions are not observed. The same 
applies for liability claims against the manufacturer. The use of accessories, which are 
not recommended or offered by Helios, is not permitted. Any damage that may occur is 
not liable for warranty.

1.3  Regulations - Guidelines

If the product is installed correctly and used to its intended purpose, it conforms to all 
applicable regulations and EC guidelines at its date of manufacture.

1.4 Receipt

The delivery contains the Mixed Gas Sensor 

KWL-VOC

 

incl. connection cable. Please 

check delivery immediately on receipt for accuracy and damage. If damaged, please 
notify the carrier immediately. In case of delayed notification, any possible claim may 
be void.

1.5 Storage

When storing for a prolonged time, the following steps are to be taken to avoid damaging 
influences:
Protection by dry, air-dustproof packing (plastic bags with drying agent and moisture 
indicators). The storage place must be waterproof, vibration-free and free of temperature 
variations. Damages due to improper transportation, storage or commissioning must be 
verified and are not liable for warranty.

1.6  Intended use

The Mixed Gas Sensor 

KWL-VOC 

measures the mixed gas concentration (VOC) in the 

room. The Mixed Gas Sensor 

KWL-VOC

 can be connected to all KWL compact units 

with the easyControls control system (Helios range) (up to max. 8 units).
Only use in normal room air. Aggressive gases can destroy the mixed gas sensor.
The mounting location affects the measurement accuracy. Proximity to windows or 
doors should be avoided, because the measurement result will be distorted by drafts.

Any other use than the intended use is prohibited!

2.0  Technical data

 

KWL-VOC

 

Dimensions (W x H x D) mm 

94 x 96 x 30

 

Power supply

 

16.5 - 28 V DC (±10 %) or

 

 

16.5 - 24 V AC (-10 %)

CHAPTER 1

 

GENERAL 

INFORMATION

ATTENTION

 

CHAPTER 2

 

TECHNICAL DATA

      EN    

Mixed Gas Sensor

 KWL-VOC 

for easyControls

Operating Instructions

1

 

m

Содержание KWL-VOC













Отзывы: