Full manual available to download from: www.Helion-RC.com
6
Reinstall the protective netting.
Now replace the body and secure
it with the four body clips.
7
Switch ON your ET4 transmitter.
Ensure the LED is lit solid red and
that no alarms are audible.
8
Locate the switch and turn
ON your Four 10SC. In the
unlikely event that the car does
not operate, see the PAIRING
instructions on the back of this
guide.
9
10
Use the throttle and steering trim
buttons to fine tune the controls of
your car. While this step has been
completed at the factory, ensure
that the Four 10SC tracks in a
straight line and doesn’t creep
forwards or backwards at zero
throttle.
Check the operation of your
throttle and steering. Pulling the
throttle trigger back will drive the
car forwards. Pushing the trigger
forwards will apply the brakes or
drive the car in reverse. Turning
the wheel right will cause the car
to turn right and vice versa.
ON
Left
Throttle
Trim
Steering
Trim
Back F
orward
Right
ON
LED
