Helion conquest 10MT XB, Руководство пользователя

Страница: 11 / 41

11
Binding/Pairing the Transmitter
Having followed steps 1 to 12, in the unlikely event that your car does not operate
please follow the 5 stage pairing process detailed here.
1. Remove the body and locate the ET3 Krypton receiver.
2. Place your Conquest and ET3 transmitter in close proximity but not less than
12” (300mm) apart.
300mm
3. Press and hold the PAIR / BIND button on the receiver then switch the receiver
on. The receiver’s LED will flash to indicate that it is in PAIR / BIND mode.
4. Press and hold the PAIR / BIND button on the transmitter then switch the
transmitter on. Release the PAIR / BIND button only when the transmitter’s LED
begins flashing.
5. When the LED on the receiver lights solid red your ET3 transmitter and
Conquest will be bound. You will now have full control of throttle and steering.
Return to Step 13 of this guide to complete the set-up of your car.