HeliArtist EC145, Инструкция по эксплуатации

Страница: 4 / 6

4
Assemble the Aluminum Skids to the Landing Gear
and secure them with CA glue.
Insert the Landing Gear Mounts to the Aluminum
Landing Gear.
Tighten the Aluminum Landing Gear to the bottom of
the fuselage using four 2x14mm Self­Tapping Screws
and 2x5mm Washers.
Tighten the Landing Gear Stairs onto the Landing Gears using
two 2x10mm Self­Tapping Screws for each Stair.
2 1
3
4
5 6
Disassembly the Tail boom from the heli mechanism. Disassembly the Tail Gear Case from the heli mechanism.
7
8
Loosen the screw from the Scorpion Tail System circled
above.
Replace the belt with a longer one included in the fuselage
and
assemble the Scorpion Tail Gear box with
the tail boom of
the helicopter and set a proper angle as shown above to get
ready for insert to the Heli mechanism and fuselage.