HeliArtist 500MD Скачать руководство пользователя

Страница: 4 / 7

Insert the Aluminum Landing Skids into the specific holes
of Plastic Landing Gears.

Secure the Landing Skids using four M3x4 set

Tighten the 2x20mm Self-Tapping Screws into the screw

screws.

holes on the Landing Gears.

Insert the Missile Mount in both Missiles and fix it

Insert the Missile Mounts into the fuselage and secure

Using glue. (Remarks: Left and Right sides are

them using 2x12mm Self-Tapping Screws.

Different.)

Insert the Plastic Landing Gears into the landing
gear position on the belly of the fuselage.

Содержание 500MD

Страница 1: ...1 ...

Страница 4: ...g Screws into the screw screws holes on the Landing Gears Insert the Missile Mount in both Missiles and fix it Insert the Missile Mounts into the fuselage and secure Using glue Remarks Left and Right sides are them using 2x12mm Self Tapping Screws Different 1 2 3 4 5 6 Insert the Plastic Landing Gears into the landing gear position on the belly of the fuselage ...

Страница 5: ...shers Insert the Heli Assembly into the fuselage to the above photo Reinstall the tail gear box to the Heli tail boom Secure the Heli Assembly onto the bottom plate of the fuselage using four 2x14mm Self Tapping Screws above photo Remarks the hight of the wood block is depend on what heli you use Use the sponge collar to hold the heli s tail boom according 7 8 10 9 11 12 ...

Страница 7: ...7 Use two M2 5x30mm screws with washers to Tighten the antenna to the tail position of the fuselage tighten the Vertical Stablizer Set to the Tail Gear Box End of Manual 19 20 ...