manualshive.com logo in svg

Heli-Max 1Si Quadcopter, Инструкция по эксплуатации

Поделиться
Скачать
Heli-Max 1Si Quadcopter Скачать руководство пользователя страница 6

6

Charge Warnings

●

  Only use the included charger with the included LiPo battery. 

Do not attempt to use the provided charger with NiCd, NiMH 
or batteries with other chemistries.

●

  Do not leave the charger unattended while in use and always charge your 

battery in a fi re-resistant location.

●

  Disconnect the battery and remove input power from the charger immediately 

if either becomes hot!

●

  Do not allow water or other foreign objects to enter the charger. Keep the 

charger away from moisture and do not submerge in water.

●

  Please keep all electronic components out of the reach of children!

®

BATTERY CHARGING

BATTERY CHARGING

●

 

WARNING!! 

The charger supplied with the Heli-Max 1Si 

Quadcopter contains protective circuitry. If you experience any 
difficulties while charging the battery, please disconnect the 
battery from the charger and unplug the charger from the power 

source. Allow the battery and charger to rest for two hours as this will allow 

the charge protection circuit to reset. If this issue re-occurs during normal 
use, please contact technical support for further assistance.

❏ 

Plug the flight battery into the end 

of the USB charger.

❏ 

Plug charger into a USB port. A 

steady red light will glow letting you 
know the battery is charging. The light 

will flash slowly when the charge is 
complete. Remove the battery from 
the charger. Under normal operating 
conditions, the battery may take up to 
60 minutes to recharge. Never leave 
the battery attached to the charger 
after charging is complete.

NOTE: 

A fast flash indicates a charge error. This is usually an indication that 

your battery is defective and should be replaced.

Содержание 1Si Quadcopter





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды