Helgi Europe
Via Artigiani 29/31 29020 Vigolzone (PC) Italy
[email protected] | [email protected]
www.helgi-solutions.com
9
Setting the upper limit switch
-
Bring the canvas to the maximum upper position, then stop the movement by pressing STOP
button (centre position)
-
Insert the 4 mm hexagonal screw (standard supplied) in the 1st hole near the opening of the
descent of the canvas, turn the screw counter-clockwise = more winding-up, clockwise = less
winding-up.
•
Each turn of the screw is approximately mm. 35 displacement of the canvas.
•
Setting the lower limit switch
-
Bring the canvas to the maximum lower position, then stop the movement by pressing
•
STOP button (centre position)
-
Insert the 4 mm hexagonal screw (standard supplied) in the 2nd hole (the farthest one from
the canvas), turn the screw counter-clockwise = more descent, clockwise = less descent.
DISCESA = DOWN SALITA = UP | LATO PROIEZIONE = PROJECTION SIDE