Q: It displays “waiting for connection” at bettom right corner of screen?
A: please check if the power supply of TX(sender) and the network cable
Are well connected.
Q: It displays“Please check the TX input signal” at middle of screen?
A: 1) Please check if there is an SDI signal input of sender TX,
2) Try to connect the source device directly with display device to see if
There is signal output from source device or change the source device
And HDMI cables to retest.
Q: Display not fluent and stable?
A: 1) Make sure network cable length is within the required range.
2) Click “reset” button on the TX/RX panel.
Specification
