Helgi Europe
Via Artigiani 29/31 29020 Vigolzone (PC) Italy
[email protected] | [email protected]
www.helgi-solutions.com
2
2.0 ASSEMBLY INSTRUCTIONS
1.
Assembling the frame of the screen. Place the frame segments on the floor - previously covered
with sheets of paper or cardboard – pay attention the sliding pins are upward. For large size
screens, with sides of the frame cut in half, assemble the "joints" to form the four sides of the
frame. Assemble the short sides, together with the long sides, using the four "corners" already
preattached to complete the structure.
2.
Assembling the projection fabric to the frame. Lay the projection fabric over the frame previously
assembled, so that the projection surface (satin finish side) is facing the floor, taking care not to
make it dirty. Insert the galvanized steel "rods" in the border outline of the projection fabric; using
the rubber bands supplied, attach the rods to the pins sliding in the frame; it is recommended to
start with the the two short screen sides first and afterwards the two long ones.
3.0 CANVAS MOUNTING DETAIL
