Helgi Europe
Via Artigiani 29/31 29020 Vigolzone (PC) Italy
[email protected] | [email protected]
www.helgi-solutions.com
2
1.1
SCREEN DESCRIPTION
1.2 GENERAL CHARACTERISTICS
This screen has been built in compliance with the dispositions of the following E.E.C. directives: low voltage
E.E.C. Directive 73-23, electro-magnetic compatibility E.E.C. Directive 89-336. All employed projection fabrics
are fire-proof certified. The fire-proof degree and relative classification class vary according to the type of
projection fabric used. This screen has been studied by technicians with a great experience in this field and
it is built according to the high quality standards that identify our products. If the machine is used following
the instructions of this handbook, you will gain the maximum efficiency and a longer life. As a consequence
we beg you to read these pages very carefully and to always follow the remarks and the advices indicated.
Safety regulations for the maintenance
Follow the maintenance regulations that are in this booklet. Do not make any repair with the machine in
motion. Use original spare parts..
Adopted safety criteria:
The standard electrical cables are contained in a single case of self extinguishing plastic materials. Thermal
electric device in case of overheating of the electric motor. Emergency red button on the screen base.
1.3 GENERAL SAFETY REGULATIONS
Read the following instructions carefully before using the machine or doing the maintenance. The
instructions of this booklet do not substitute but complete the obligations towards the safety and accident
regulations in force.
1.3.1 Before:
Read the instructions concerning the preparation of the machine. Check all the protections of the machine
and substitute the damaged parts immediately with the original spare parts. Read the handbook for use and
maintenance.
1.3.2 During:
Pay attention to the electrical parts and when the screen is in movement.
1.3.3 After:
Clear the main switch
