7. Install the Bottom guide
Position and mark the place of the bottom guide so that it is
completely hidden when the door is at the “open” end.
Slide the door out of the way and screw the bottom guide to
the
fl
oor. The bottom guide should remain in the guiding groove
throughout the entire movement of the door.
8. Move the Stop to the correct position
Move the stop to where you want the door to stop at the “open”
and “closed” ends and tighten.
The best way to tighten with one hand is to push the stopper to
the ceiling of the track while tightening it. Use a good tool to get
a
fi
rm grip.
9. Install the Cover plate
Before installing the cover plate, make sure that the door and all
parts are in the correct position, function and height.
1. Insert the
lower clamp
of the Cover plate into the groove on
the track and slide the Cover plate in the middle of the track.
2. Use one hand to hold the Cover plate on the track and with
another hand, press the upper clamp of the Cover plate to its
place starting from the end of the track.
Proceed this way along the entire track, moving only one hand at
a time.