2 von 2 | 27.06.2017
5. Battery change
Set the switch to the "Off" position before changing the battery or inserting new batteries.
Open the battery compartment cover and insert the batteries.
Pay attention to the correct polarity of batteries as shown in the housing (Size +/-).
Close the battery compartment after inserting the batteries.
Press the switch to turn on.
6. Faulty Function
Battery inserted correctly/dead?
7. Technical Data
8.Care
Disconnect the entire product from the mains first before cleaning or maintaining the product.
9. Waste Disposal
Old electronic devices must be taken to public waste disposal sites and must not be put into general
household waste.
Batteries must not be put into general household waste. As an end consumer, you are legally obligated to
return used batteries. You can return batteries free of charge after use to the point of sale or somewhere
in your direct vicinity (e.g. in communal collection points or retail outlets).
Batteries containing pollutants are marked with the symbol showing a crossed out bin and one of the
chemical symbols Cd (=battery contains cadmium), Hg (=battery contains mercury) or Pb (=battery
contains lead).
Precautions must be taken against short-circuiting if the batteries are not fully discharged. Only
discharged batteries may be put in the old battery containers you find in shops and at public disposal
companies. Short-circuiting can be prevented by isolating the poles with sticky tape.
Article
Supply
Lamp
Protection
Type
Protection
Class
49601
je 3x AA, 1,5V
LED lamp, not replaceable
IP 20
III
49602
2x CR 2032
LED lamp, not replaceable
IP 20
III
49603
je 3x AAA, 1,5V
LED lamp, not replaceable
IP 20
III
49604
je 3x AAA, 1,5V
LED lamp, not replaceable
IP 20
III
49611
je 3x AAA, 1,5V
LED lamp, not replaceable
IP 20
III
49612
2x 18650, 3,7V
LED lamp+accu, not
replaceable
IP 20
III
