Installation instructions Art. No. 35856,35857,35858
Page 2 of 2
Status 11.2014
Installation:
Perform all handling operations on the ground spike only when the power is disconnected.
Place the ground spike at the selected place by following the safety and warning notes. Make
sure that no water can collect at the location.
Push the ground spike into the ground by hand. Please do not use a hammer or similar tool to
do this.
The ground spike cannot be rammed into rock. There is danger of injury and the spike could
become damaged.
Position the ground spike at the desired place. Make sure that the ground spikes are firmly
connected with the base.
Make sure that there are no obstacles in the walking area when laying the cable.
The ground spike and the cable must not be buried into the ground and must be freed from
leaves and dirt if necessary.
Check the entire system at regular intervals for tightness, ability to function and possible
damage.
Check the proper connections once again.
The name plate must not be removed.
Assembly instructions:
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
