Installation instruction Art. No. 28665
Page 1 of 2
Status 10.2010
GB Installation and operating instructions
LED spot flex 2W
Art. No. 28665
Many thanks for deciding to buy our lights.
Our LED light is made out of sturdy, high value materials and will provide you with quality lighting. The
light can be used only indoors.
Please read through installation and operation instructions carefully and keep these in a safe
place for future reference.
We do not accept liability for damage to persons or property caused by non observation of the
instructions, improper handling or for unauthorized changes made to the product.
Package contents:
1 LED light
Installation and operating instructions
Technical data:
LED spot
Connection
12 V DC
Illuminant
1 LED illuminants max. 2W
cannot be changed
LED- Class
1
Protection type
IP 20
Protection Class
II
LED Driver
Connection
100-240 V
, 50 Hz
Output voltage
12DC, 0,5A.
Rated output
0…6W
Ambient temperature t
a
- 10° - max. 50°C
Protection class
II
Length
45 mm
Width
30 mm
Height
65 mm
Safety and warning notes:
Do not look directly into the LED - especially for longer periods of time - without protecting
your eyes. A LED beam should not be directed into other people's eyes.
Make sure, before using the light that it has not been damaged during transportation. Do not
operate the light if the cable or the electrical parts are damaged. Repairs may only be done by
a specialist electrician.
Keep packaging materials well away from children and pets. Danger of suffocation!
Be careful. The packaging contains small parts which can be swallowed by children.
Do not leave children unattended in the area of the lights or other electrical appliances.
The entire product must neither be changed nor converted. Changes made to the light lead to
annulment of the guarantee (warranty).
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
