background image

Tube

Νet

Reflector

Handle

Side Cover

1. Brief instruction

The item applies infrared heating technique, which can be easily absorbed by human bodies.
Even though it is used in a poor airproof or spacious room, it can provide ideal warming effect.
The heater bears novel design, elegant outlook and the following features as well:
1. Adopting quartz tube, heated thread, this can heat up quickly along with the heat change efficiently.
2. New designed, which can provide high quantity of heat reflecting.
3. Fall over switch, which can cut off the electrical resource to protect safety when it fell down.

2. Specification

• Rating voltage:220VAC
• Frequency:50Hz
• Rating power: 2400W

3. Operation

• Put the plug into the socket.

   Press the appropriate button and select one of the following operating options:

• 400W   (TOP SIDE)

• 1000W (FRONT SIDE)

• 1400W (FRONT SIDE & TOP)

• 2400W (FRONT SIDE & TOP)

• When not use, turn off power switch, pull out plug and put away the cord into the collecting box.

4. Caution for operation

1. Read all instructions before using this heater.
2. The heater work under 220VAC, make sure to insert the plug into the suitable electrical outlet but don't keep it on when not use.
3. This heater is hot when in use. To avoid burns, do not let the bare kin touch hot surfaces.
4. This heater must use in the explanate place to keep the heater can running in the natural and can be used safety.
5. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3m from the front of the heater and keep them away from sides 
and rear.
6. Do not use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the 
appliance by a person responsible for their safety.
7. Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
8. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
9. If it is necessary to take precautions during the installation of the appliance, appropriate details shall be given.
10. Do not use the heater about the possible danger of installations close to curtains and other combustible materials.
11. Extreme cautions are necessary when any heater is used by a near children or invalids and whenever the heater is left operating and unattended.
12. Always unplug heater when not use.
13. Do not operate any heater with a damaged cord or plug or after the heater malfunctions has been dropped or damaged in any manner. Return heater to authorized service facility for examination electrical or 
mechanical adjustment or repair.
14. Do not use outdoors.
15. This heater is not intended for use in bathrooms, laundry, areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
16. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
17. To disconnect heater, turn controls to “off”, then remove plug from outlet.
18. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater.
19. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like bed, where openings may become blocked.
20. A heater has not and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored.
21. Use this heater only as described in this manual. Any other use not recommended by manufacture may cause fire, electric shock or injury to persons.
22. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire.
23. Do not use the heater if the heating element is damaged. Please send it to the manufacturer or its service agent or similarly qualified person to repair.
Damaged supply cords to be replaced by the manufacturer, service agent or similarly qualified person to avoid hazard.

5. Maintenance

The regular cleaning of the reflector
1. Before cleaning, the plug must be removed from the socket outlet.
2. Take down the steel grill.
3. First use a damp cloth to wipe off dirt from surface of the reflector, and the clean again with a wet cloth, finally clean it again with a damp cloth.
4. After cleaning, fit the steel grill on. The unit surface can clean with a wet cloth, furthermore, it can clean with suds or some detergents. But do not use gas or chemical agents. furthermore, it can clean with suds or 
some detergents. But do not use gas or chemical agents.

Thank you for purchasing this product. 
Please read these instructions carefully before use and keep them in a safe place.

INSTRUCTION MANUAL

QUARTZ HEATER 2400W

The appearance and main parts of the product

CODE: 395 735

Отзывы: