Heinz Walz US-SQS, Инструкция по эксплуатации

Страница: 14 / 23

CHAPTER 5 MAKING MEASUREMENTS
10
5 Making Measurements
5.1 General Information
Before you start the measurement, connect the sensor to your dis-
play or data-logging device and remove the clear acrylic protection
shield. Make sure the calibration factor is entered correctly in the data
logger, when using the US-SQS/L or US-SQS/IB (see below). The
US-SQS/WB and the US-SQS/B come with an amplifier. The sensor
specific calibration factor is set within this amplifier during manufac-
turing and can not be changed by the user (see below).
5.2 PAM Applications
The basic sensor US-SQS/L can be combined with special ampli-
fiers for different PAM instruments. For PAM applications with sus-
pension cuvettes, we provide a version with an adjustable black hood.
5.2.1 US-SQS/L
The US-SQS/L consists of the
sensor with a 3 m cable and BNC con-
nector. It can be connected to the
ULM-500 or other data loggers.
5.2.2 US-SQS/IB
The US-SQS/IB has an adjustable
black hood. The ULM-500 or another
external data logger is required. The
US-SQS/IB is recommended for the
use with a PAM-100 or XE-PAM.