HEINRICH'S HDG 8687, Руководство по эксплуатации, Страница: 15 / 76

15
Notes on Use
Electric Connection
1. Ensure that the switch is set to “0” position.
2. Before inserting the power plug into the outlet, check that the mains voltage
to be used matches that of the appliance. You can find the required
information on the nameplate.
3. Connect the mains plug to a properly installed shockproof socket only.
Power On / Off
The switch (8) turns the appliance on and off.
= On (The pilot lamp inside the switch lights up.)
= Off
Before Initial Use
1. Insert the reflector sheet only.
2. A protective layer is located on the heating element. Operate the appliance
without the other components and without foods for approx. 10 minutes in
order to remove it.
NOTE:
Occurrence of light smoke and odor is normal during this procedure. Ensure
adequate ventilation.
WARNING: Danger of burns!
Allow appliance to cool down before assembling the other components!
CAUTION :
Always ensure you keep approx. 1 cm spacing between the grillables and heating
elements.
NOTE:
Do not place the grillables beyond the heating element’s height.