www.heinner.com 750W, 50Hz, 220-240V
21
X. ERROR DETECTION
Before you contact our services center, please check the following points:
Problem
Possible reason
Active
Motor does not start
-Power card not firmly plugged
into outlet
-Outlet damaged
-Cleaner not switch on
-Plug unit firmly
-Check the outlet
-Switch on the appliance.
Suction power is weaker
-unit clogged
-Dust filter needs
cleaning
-Dust container not in position
-Filter blocked
-Remove the blockage
-Clean the dust filter
-Close the dust container
-Clean the filter
The wire can not be
winded completely.
The wire may diverge the wire
wheel.
Draw the wire a little then
rewind.
The wire can not be
draw out.
The wire may wind disorder
Press the rewinder button
and try again.
Speed adjust does not
work
Appliance is defective
Repair the appliance
(only specialist)
Power card winds
unwanted back
Rewind mechanisms is defective Repair the appliance
(only specialist)
The dust container can
not be closed
Dust filter is not in the position
Fix the dust filter and try
again
Warning:
If the supply card is damaged, it must be replaced by the manufacturer or its server agent
of a similarly qualified person in order to avoid a hazard.
