5
4. Press carriage handle down vertically until it is positioned in place, the indicator of
Cancel will be illuminated, and toasting begins. Once the bread has been toasted to the
preset color, the carriage handle will be automatically sprung up, and you can remove
the bread readily.
Note: The carriage handle can only be latched when the appliance connects to the
power supply.
5. During the toasted process, you may observe the toasting color. If it is satisfactory,
you may interrupt the toasting process by pressing the Cancel button at any time.
6. If the bread has been taken out from refrigerator. Set color control knob to your
desired color. Press carriage handle down vertically until it is positioned in place, then
press DEFROST button and the indicator of DEFROST will be illuminated. In this mode it
will be toasted to your desired color.
7. If you want to reheat the cold toasted bread. Press carriage handle down vertically
until it is positioned in place, then press REHEAT button and the indicator of REHEAT will
be illuminated. In this mode toasting time is fixed, so long as time is running over, the
carriage handle will automatically spring up and end up the reheating process.
CAUTION
1. Remove all protective wrappings prior to toasting.
2. If toaster starts to smoke, Press Cancel button to stop toasting immediately.
3. Avoid toasting the food with extremely runny ingredients such as butter.
4. Never attempt to remove bread jammed in the slots without unplugging the toaster
from the electrical outlet first. Be sure not to damage the internal mechanism or heating
elements when removing bread.
5. The bread slot is only applicable for toasting regular bread slice.
6. In order to achieve uniform color we recommend that you should wait minimum 30
seconds between each toasting so that color control can reset automatically.
www.heinner.com 720-850W, 220-240V
~
,
50
-
60Hz
