Heinner HTF-3080TB, Руководство пользователя

Страница: 7 / 12

www.heinner.com
IV. USING INSTRUCTION
1. Assembling
Picture1 Picture 2
Picture3 Picture 4
1. Spin 3 screws (Picture 1) out from the turnplate.
2. Fasten the back base and front base each other.(Picture 2)
3. Align with the base and turnplate screw, then spin into 3 screws. (Picture 3)
4. Press the power cord into the line deduction.(Picture 4)
2.
Operation
Manual control
1.
Timer
：
You can set the time from 0.5h to 7.5h with this button.
2. Swing: When working, you can make it swing or not if press this button.
3. Speed: There are 3 speeds for you: Low / Mid / High; press this button and choose
the speed you need.
4. On/Off
：
Work or not.
5. Rotating Angle: 75°
Warning:
To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control
device, unplug or disconnect this fan from the power supply before servicing. Unplug the fan
before cleaning.
V. CLEANING AND MAINTENANCE
1. When the fan stops ,it should be cleaned and kept well.
2. Body: Clean it with soft cloth or soft thin paper. If the dust is uneasy to wipe away,
rub it with soap water. Don’t use gasoline, diluents and other solvents.