www.heinner.com
50Hz, 220-240V
16
Problem
Possible cause
Solution
The extractor fan ceases to
function.
The kitchen hood feed
cable is not connected to
the network.
There is no electrical
current in the network.
Connect feed cable to the network.
Check that the network has electrical
current.
Insufficient suction power. Did not set to the right
speed and/or air outlet
being blocked.
If the kitchen hood is set up for
recirculation, check that the charcoal filter
is still effective.
If the kitchen hood is set up for extraction,
check that the ducting and outlets are not
blocked.
The kitchen is adequately vented to allow
the entry of fresh air.
Hood has switched off
during operation.
The safety cut-out device
has been tripped.
Turn off the hood and then wait for the
device to reset.
If the hood has been installed below the
heights indicated in the installation
instructions, the motor will cut-out
frequently which may damage the hood.
The lamps do not light up.
The lamps are burnt out.
The lamps are loose.
Change the lamps.
Tighten the lamps.
VII. TROUBLESHOOTING
Electric diagram:
