Heinner HMF-1500MIX, Инструкция по эксплуатации

Страница: 7 / 12

www.heinner.com
7
4. USING INSTRUCTION
1. Assembling
1. Remove the wing screw form the motor housing
2. Fit the rear grill onto the motor pain. Make sure that the 2 holes on the motor
match the 2 holes on the rear grill, fit the wing screw and screw it on firmly
3. Put the blade on the motor pain and carefully tighten the screw
4. Fit the front grill onto the rear grill and fix them together using the metal clips.
Tighten the small screw
5. Fix the stand pole on the standing base and screw it firmly
6. Put the motor housing, which had been fixed by the front grill, blade and rear grill
on the top of stand pole
7. For the floor fan and wall fan, first of all, fix up the base pipes, please see the
following instruction picture, and screw them firmly by the small screw
8. Put the floor fan (wall fan) base on the neck of main unit which had been fixed by
the front grill, bade and rear grill. And then screw it by the big screw
9. For the wall fan function: The floor fan base is same as wall fan base, please fix the
hooks on the wall, and then put the floor(wall) fan base into the hooks
2. Operation
The fan has 3 speed settings:
0 ‐ Fan is off
1 ‐ Lowest speed
2 ‐ Medium speed
1 FRONT GRILL
2 BLADE
3 REAR GRILL
4 SWITCH
5 STAND POLE
6 STAND BASE
7 MOTOR HOUSING
8 FLOOR FAN BASE
9 WALL FAN BASE