www.heinner.com 2000-2400W, 50Hz, 220-240V
3. Put the iron on the steam station iron’s thermal insulating cushion.
4. Connect the plug to wall outlet, one “D” sound of buzzer can be heard and the working
indicator starts to illuminate.
5. Turn temperature dial to your desired setting, which is depended on the fabric of
garment, refer to IRONING TIPS latter. The soleplate starts to be heated up and the
working indicator begins to flash.
6. When the working indicator changes from flashing to illuminating, it means the
selected temperature is reached and the steam is ready for ironing.
Note: During ironing, the temperature indicator goes on from time to time. This
indicates that the iron is heating up to the set temperature.
Note: The system may occasionally produce a pumping sound during steam ironing. This
is normal and tells you that water is pumped into the soleplate.
7. Press the steam trigger to release steam for ironing.
Caution:
1) Do not touch hot soleplate at any time before cooling down!
2) Never direct the steam at people!
3) The supply cord may become hot during a long ironing session.
8. During operation, if there is less water in the tank, the lack of water indicator will be
illuminated, following with two “D” sounds of buzzer. At that time, you should refill the
water tank. After it, press the reset button to reactivate the steam release function.
Note: After refill the water tank with water, you must press the reset button. If not, the
steam cannot be sprayed out.
9. After ironing, you can put the iron the thermal insulating cushion. If there is no steam
sprayed out from the soleplate within 8 minutes, the appliance will be turned off
automatically. Remove the plug from the wall socket. But the soleplate is still hot, never
touch it with hand, place it on the thermal insulating cushion until it cools down
completely.
10. And you can hold the iron in vertical position and press the steam trigger to iron
hanging curtains and clothes (jackets, suits, coats).
11. The iron has an anti-drip function. If iron garments too long time, the temperature of
soleplate will decrease, the iron will stop coming out steam automatically and no water
droplets can come out from soleplate.
