Heinner HFSC-V60LITSL, Руководство пользователя

Страница: 47 / 128

www.heinner.com
46
Determining the minimum flame position
To determine the minimum position, ignite the burners and leave them on in the
minimum position. Remove the knobs to gain access to the screws. With the help
of a small screwdriver, fasten or loosen the bypass screw by around 90 degrees.
When the flame has a length of at least 4mm, the gas is well distributed. Make sure
that the flame does not die out when passing from the maximum position to the
minimum position. Create an artificial wind with your hand towards the flame to see
if the flames are stable. For the oven burner, operate the oven burner at the
minimum position for 5 minutes, then open and close the oven door 2-3 times to
check the flame stability of the burner.
Screw (inside the hole)