Heinner HFH-2200, Инструкция по эксплуатации

Страница: 8 / 15

an electric shock, fire or damage to the appliance.
25. Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.
26. The most common cause of overheating is deposits of dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging the appliance and vacuum cleaning air vents and grilles.
27. Always use the heater in upright position.
28. Do not use the appliance in rooms less than 4m2 area.
29.
To disconnect the appliance, switch it “OFF”, then remove the plug from outlet. Do not pull out the
cord because this could damage it.
30. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
31. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
OPERATION:
NOTE: It is normal that when you use the appliance for the first time or after a longer period of
non-using, radiators to emit a certain smell and fumes. These will disappear when the heater operated
a short period of time.
INSTALLATION:
The device requires no installation. It is only to be used as portable.
The devices are not suitable for use in the bathroom.
OPERATION:
- Turn the thermostat knob to clockwise direction, until it reaches the maximum temperature.
- Operation in Summer (ventilation only): Turn the switch to the position « ».
- Heating to middle power: turn switch (right) to position I (1000W).
- Heating at full power: turn switch (right) to position II (2000W).
-
Turn the switch to “0” position to switch off the heater.
ADJUST THERMOSTAT:
Once the room temperature is reached, slowly turn the thermostat knob to counterclockwise
direction, until you hear a click and the appliance will stop working. Then the heater will turn on and off
automatically to maintain the room temperature you have set.
CLEANING AND MAINTENANCE
Always disconnect the appliance and remove the plug before any maintenance.
Clean frequently air intake and exhaust air grilles.
Never use any solvents for cleaning!