Heinner HFF-N80A+, Руководство пользователя

Страница: 33 / 67

www.heinner.com
32
Problem possible cause Solution
Appliance dose not
work.
Appliance is not switched on. Switch on the appliance.
Main plug is not plugged in or is
loose. Plug the appliance into the electrical socket.
Fuse has blown or is defective. Check fuse, replace if necessary.
Outlet is defective. Defective parts need to be repaired by an
electrician.
Appliance cools too
much. Temperature is set too cold. Turn the temperature regulator to a warmer
setting temporarily.
The food is too warm.
Temperature is not properly
adjusted.
Please refer to the “Initial Start
Up” section.
Door was open for an extented
period. Open the door only as long as necessary.
A large quantity of warm food was
placed in the appliance within the
last 24 hours. Turn the temperature regulator to a warmer
setting temporarily.
The appliance is near a heat source. Please refer to the “Installation Location”
section.
Interior lighting dose
not work. Light bulb is defective. Please look in the “Changing the Light Bulb”
section.
Heavy build-up of frost,
possibly also on the
door seal. Door seal is not air-tight (possibly
after reversing the door).
Carefully warm the leaking sections of the
door seal with a hair dryer (on a cool
setting). At the same time, shape the
warmed door seal by hand so that it sits
correctly.
Unusual noises.
Appliance is not level. Readjust the feet.
The appliance is touching the wall
or other objects. Move the appliance slightly.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or
the wall. If necessary, carefully bend the component
out of the way.
The compressor dose
not start immediately
after
changing the
temperature setting.
This is normal, no error has
occurred.
The compressor starts after a period of
time.
Water on the floor or
storage shelves. Water drain hole is blocked. Refer the “Cleaning and Care” section.