Heinner HFF-160A+, Руководство пользователя

Страница: 33 / 80

www.heinner.com
32
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the
lower rear section of the appliance, as poor air circulation can affect perfor- mance.
Built-in appliances should be positioned away from heat sources such as heaters and
direct sunlight.
Leveling
The appliance should be level in order to eliminate vibration. To make the appliance
level, it should be upright and both adjusters should be in stable contact with the floor.
You can also adjust the level by unscrewing the appropriate level adjustment in the front
(use your fingers or a suitable spanner).
Electrical connection
Conexiunea electrica
Caution! Any electrical work required to install this appliance should be carried out by a
qualified or authorized person.
Warning! This appliance must be grounded. The manufacturer declines any liability
should these safety measures not be observed.
Reversing the door
The side in which the door opens can be changed from the right side (as supplied) to the
left side, if the installation site allows for it. Tools you will need:
1. 8mm socket driver
2. Cross-shaped screwdriver
3. Putty knife or thin-blade screwdriver
A. Stand the freezer, use a flat bladed screw driver to remove the 4 screw covers at
the rear of the freezer lid.
B. Unscrew and lift the lid from the rear and remove it, then lift the upper door
and place it on a padded surface to prevent it scratched.