10
Remove transport packaging
The appliance and the interior fittings are protected are protected for transportation. Pull
of the adhesive tape on the left and right side of the door. You can remove any remnants of
adhesive using white spirit. Remove all adhesive tape and packing pieces from the interior
of the appliance.
Positioning
Position the appliance away from sources of heat such as stoves, radiators, direct sunlight
etc. Maximum performance and safety are guaranteed by maintaining the correct indoor
temperature for the class of unit concerned, as specified on the rating plate. This
application performs well from N to ST. The Appliance may not work properly if it is left for
a longer period at a temperature above or below the indicated range.
IMPORTANT
- There is a need of good ventilation around the fridge for easy dissipation of
heat, high efficiency of refrigeration and low power consumption. For this purpose,
sufficient clear space should be available around the fridge. It is advisable for there to be
50-70 mm separating the back of the fridge to the wall, at least 100 mm of space at its two
sides, height of over 100 mm from its top and a clear space upfront to allow the doors to
open 160°.
Climate classification
Ambient temperature
SN
10-32
°
C
N
16-32
°
C
ST
16-38
°
C
T
16-43
°
C
Appliances must not be exposed to rain. Sufficient air must be allowd to circulate in the
lower rear section of appliances, as poor air circulation can affect performance. Built-in
appliances should be positioned away from heat sources such as heaters and direct
sunlight.
