Heinner HEM-850IXBK, Инструкция по эксплуатации

Страница: 16 / 41

www.heinner.com 850W, 50-60Hz, 220-240V
15
V. USING INSTRUCTION
➢
BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm
water as following:
1. Open water tank cover, fill water into water tank, water level should not exceed the “ MAX ”
mark
in water tank. Then replace the water tank cover.
Note: the appliance is supplied with a detachable water tank for easy cleaning, you can fill water
tank with water first, and then attach water tank into the appliance.
2. Set steel mesh into metal funnel (no coffee in steel mesh), make sure the tube on the funnel
aligns with groove in the appliance, then insert the funnel into the appliance from the
“ INSERT ”
position, and fix them into coffee maker firmly by turning it anticlockwise until it is at the “ LOCK ”
position.
3. Place a jug on removable cup shelf. Make sure steam control knob is on the OFF position.
4. Connect to power source, press power button, power indicator is illuminated red.
5. Press Coffee button, the unit will pump water, when there is water flowing out, press Coffee
button to stop pumping water, press Steam button and wait for a moment, the appliance begins
to preheat until Coffee button indicator is illuminated, it shows the preheating is finished. Press
Coffee button and water will flow out.
6. After water does not drop out anymore, pour out water in each container then clean them
thoroughly, now the appliance is ready for making coffee.
Note: There may be noise when pumping water for the first time, it is normal that the appliance
is releasing the air inside. After about 20s, the noise will disappear.
➢
PREHEATING
To make a cup of good hot Espresso coffee, we recommend you should preheat the appliance
before making coffee, including metal funnel, steel mesh and cup, so that the coffee flavour can
not be influenced by cold parts.
1.
Remove detachable water tank and open water tank cover to fill it with desired water, the
water level should not exceed the “ MAX ” mark in the tank. Then replace water tank
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in
the appliance, then insert the funnel into the appliance from the “ INSERT ” position, and fix them
into coffee maker firmly by turning it anticlockwise until it is at the “ LOCK ” position.
3. Place an espresso cup on removable cup shelf.
4. Then connect appliance to power supply. Make sure steam control knob is on the OFF
position.