19
Spray arms
Make sure that the spray holes are not clogged and that no food waste is stuck to the spray
arms. If there is any clogging, remove the spray arms and clean them under water. To remove
the upper spray arm undo the nut holding it in position by turning it clockwise and pulling it
downwards. Make sure that the nut is properly tightened when refitting the upper spray arm.
Hose filter
Water is prevented by the inlet hose filter so as to avoid any damage to your machine because of
any contamination (sand, clay, rust etc.) that might be occasionally carried in through the mains
water supply or the indoor plumbing, and to forestall such complaints as yellowing and
formation of deposits after washing. Check the filter and the hose from time to time and clean
them if necessary. To clean the filter, first turn off your tap and then remove the hose. After
removing the filter from the hose, clean it under the tap. Insert the cleaned filter back into its
place inside the hose. Refit the hose.
