Heinner HCU-S11, Руководство пользователя

Страница: 18 / 48

www.heinner.com 2500/2900W, 50/60Hz, 220-240V
17
VI. USING INSTRUCTIONS
1. Before using the heater, make sure that it is on a flat and stable surface.
Damage may occur if it is placed on an incline or decline.
2. Set all the controls to OFF position and insert the plug into a socket-outlet with well
grounded. Be sure that plug fits firmly.
3. Rotate the thermostat knob clockwise to MAX position and switch the heater on as
follow: the switch I for low heat, the switch II for medium heat and both switches on for
high heat.
4. When your room reaches the desired temperature, now slowly rotate the thermostat
knob counter clockwise until the pilot light goes out. The thermostat can now be left at
this setting. As soon as the room temperature has dropped below the set temperature,
the unit will switch it self on automatically until the set temperature has been reached
again. In this way the room temperature remains constant with the most economical use
of electricity.
5. If you want to change the room temperature setting, rotate the thermostat knob
clockwise to raise the temperature, or counter clockwise to lower it.
6. This heater includes an overheat protection system that shuts off the heater when
parts of the heater are getting excessively hot.
7. To completely shut the heater off, turn all the controls to OFF, and remove plug from
the socket-outlet.
8. Your heater is designed to automatically shut-off when tipped. When returned to
normal upright position, heat will automatically come on again. This is a safety feature to
avoid possibility of fire should the unit be accidentally upset.