Heinner HCH-490-BK, Инструкция по эксплуатации

Страница: 11 / 58

www.heinner.com 2x60W, 50Hz, 220-240V
10
VII. CLEANING AND MAINTENANCE
Caution:
•
Before maintenance or cleaning is carried out, the cooker hood should be
disconnected from the mains power supply. Ensure that the cooker hood is
switched off at the wall socket and the plug removed.
•
External surfaces are susceptible to scratches and abrasions, so follow the
cleaning instructions to ensure the best possible result is achieved without
damage.
GENERAL
Cleaning and maintenance should be carried out with the appliance cold especially
when cleaning. Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on
the surfaces.
STAINLESS STEEL
The stainless steel must be cleaned regularly (e.g. weekly) to ensure a long life
expectancy. Dry with a clean soft cloth. A specialized stainless steel cleaning fluid may
be used.
Note: Ensure that wiping is done along with the grain of the stainless steel to prevent
any unsightly crisscross scratching patterns from appearing.
CONTROL PANEL SURFACE
The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is
clean and well wrung before cleaning. Use a dry soft cloth to remove any excess
moisture left after cleaning.
Important: Using neutral detergents and avoid using harsh cleaning chemicals, strong
household detergents or products containing abrasives, as this will affect the
appearance of the appliance and potentially remove any printing of artwork on the
control panel and will void manufactures warrantee.
GREASE MESH FILTERS
The mesh filters can be cleaned by hand. Soak them for about 3 minute in water with a
mild detergent and then brush it gently with a soft brush. Do not apply too much
pressure so as to avoid any damage to it. (Leave to dry naturally out of direct sun light)
Filters should be washed separately to crockery and kitchen utensils. It is advisable not
to use rinse aid.